Google Reviews
TrustPilot Reviews
ATV212HU30N4
variable speed drive, Altivar 212, 3kW, 480V, 3 phases, with EMC, IP21
Disponibile
Richiedi un preventivo adesso
Fare clic per guardare il video 
This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP21 and it has a built-in EMC filter. It works at a rated power up to 3kW and a rated voltage from 380V to 480V AC. Its design is based on eco-energy with a reduction in energy consumption of up to 70% compared to a conventional control system. Thanks to its cable temperature rise reduction technology, the Altivar 212 drive offers immediate, disturbance-free operation avoiding additional options such as a line choke or DC choke to deal with current harmonics. It weighs 3.35kg and its dimensions are, 142mm wide, 184mm high, 150mm deep. It is specifically designed for the most common fluid management applications in tertiary sector buildings (HVAC) like heating, ventilation, air conditioning and pumping. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, C-Tick and NOM certified. The Altivar 212 offers optional motor chokes which can increase the maximum cable lengths between the drive and the motor and limit disturbance at the motor terminals. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. The Altivar 212 drive can easily be adapted to all building management systems thanks to its numerous functions and communication protocols integrated as standard, Modbus, METASYS N2, APOGEE FLN P1 and BACnet.
Per saperne di più
Weniger lesen
Weniger lesen
| Specification | Value |
|---|---|
| Prospective Line Isc | 5 kA |
| Electrical Connection | VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 2.5-2.5 mm² / AWG 14 || L1/R, L2/S, L3/T terminal 6-6 mm² / AWG 10 |
| Network Frequency | 47.5...63 Hz |
| Discrete Input Logic | positive logic (source) F, R, RES), <= 5 V, >= 11 V || negative logic (sink) F, R, RES), >= 16 V, <= 10 V |
| Type Of Cable | without mounting kit 1 IEC cable 45 °C, copper 90 °C / XLPE/EPR || without mounting kit 1 IEC cable 45 °C, copper 70 °C / PVC || with UL Type 1 kit 3 UL 508 cable 40 °C, copper 75 °C / PVC |
| Height | 184 mm |
| Acceleration And Deceleration Ramps | automatic based on the load || linear adjustable separately from 0.01 to 3200 s |
| Analogue Output Type | FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bits || FM switch-configurable current 0...20 mA 970 Ohm 10 bits |
| Speed Drive Output Frequency | 0.5-200 Hz |
| Discrete Output Type | configurable relay logic FLA, FLC) NO - 100000 cycles || configurable relay logic FLB, FLC) NC - 100000 cycles || configurable relay logic RY, RC) NO - 100000 cycles |
| Transmission Frame | RTU |
| Torque Accuracy | +/- 15 % |
| Asynchronous Motor Control Profile | voltage/frequency ratio, 2 points || voltage/frequency ratio, 5 points || voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) || voltage/frequency ratio - Energy Saving, quadratic U/f || flux vector control without sensor, standard |
| Maximum Switching Current | 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R) || 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R) || 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R) || 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R) |
| Communication Service | write multiple registers (16) 2 words maximum || read holding registers (03) 2 words maximum || time out setting from 0.1 to 100 s || read device identification (43) || monitoring inhibitable || write single register (06) |
| Transient Overtorque | 120-120 % of nominal motor torque +/- 10 % 60 s |
| Insulation Resistance | >= 1 mOhm 500 V DC for 1 minute |
| Response Time | FM 2 ms +/- 0.5 ms analog || FLA, FLC 7 ms +/- 0.5 ms discrete || FLB, FLC 7 ms +/- 0.5 ms discrete || RY, RC 7 ms +/- 0.5 ms discrete |
| Data Format | 8 bits, 1 stop, odd even or no configurable parity |
| Apparent Power | 5.5 kVA 380 V |
| Dielectric Strength | 3535 V DC between earth and power terminals || 5092 V DC between control and power terminals |
| Power Range | 2.2-3 kW 380-440 V 3 phase || 2.2-3 kW 480-500 V 3 phase |
| Net Weight | 3.35 kg |
| Type Of Polarization | no impedance |
| Frequency Resolution | display unit 0.1 Hz || analog input 0.024/50 Hz |
| Accuracy | +/- 0.6 % VIA) for a temperature variation 60 °C || +/- 0.6 % VIB) for a temperature variation 60 °C || +/- 1 % FM) for a temperature variation 60 °C |
| Switching Frequency | 6...16 kHz adjustable || 12...16 kHz with derating factor |
| Maximum Transient Current | 7.9 A 60 s |
| Connector Type | 1 open style || 1 RJ45 |
| Analogue Input Number | 2 |
| Functionality | mid |
| Motor Slip Compensation | adjustable || automatic whatever the load || not available in voltage/frequency ratio motor control |
| Motor Starter Type | variable speed drive |
| Discrete Output Number | 2 |
| Minimum Switching Current | 3 mA 24 V DC configurable relay logic |
| Analogue Output Number | 1 |
| Physical Interface | 2-wire RS 485 |
| Power Dissipation In W | 137 W |
| Continuous Output Current | 7.2 A 380 V || 7.2 A 460 V |
| Number Of Addresses | 1-247 |
| Tightening Torque | 1.3 N.m, 11.5 lb.in L1/R, L2/S, L3/T) || 0.6 N.m VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) |
| Discrete Input Type | F programmable 24 V DC level 1 PLC 4700 Ohm || R programmable 24 V DC level 1 PLC 4700 Ohm || RES programmable 24 V DC level 1 PLC 4700 Ohm |
| Speed Range | 1-10 |
| Isolation | electrical between power and control |
| Local Signalling | for DC bus energized 1 LED (red) |
| Linearity Error | VIA +/- 0.15 % of maximum value input || VIB +/- 0.15 % of maximum value input || FM +/- 0.2 % output |
| Specific Application | HVAC |
| Output Voltage | <= power supply voltage |
| Nominal Switching Frequency | 12 kHz |
| Width | 142 mm |
| Transmission Rate | 9600 bps or 19200 bps |
| Braking To Standstill | by DC injection |
| Air Flow | 47 m3/h |
| Depth | 150 mm |
| Protection Type | overheating protection drive || thermal power stage drive || short-circuit between motor phases drive || input phase breaks drive || overcurrent between output phases and earth drive || overvoltages on the DC bus drive || break on the control circuit drive || against exceeding limit speed drive || line supply overvoltage and undervoltage drive || line supply undervoltage drive || against input phase loss drive || thermal protection motor || motor phase break motor || with PTC probes motor |
| Supply | internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection || internal supply 24 V DC 21-27 V), <200 A overload and short-circuit protection |
| Analogue Input Type | VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits || VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits || VIB configurable PTC probe 0...6 probes 1500 Ohm || VIA switch-configurable current 0...20 mA 250 Ohm 10 bits |
| Discrete And Process Manufacturing | building - HVAC compressor for scroll || building - HVAC fan || building - HVAC pump |
| Sampling Duration | 2 ms +/- 0.5 ms F discrete || 2 ms +/- 0.5 ms R discrete || 2 ms +/- 0.5 ms RES discrete || 3.5 ms +/- 0.5 ms VIA analog || 22 ms +/- 0.5 ms VIB analog |
| Speed Accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
| Option Card | communication card LonWorks |
| Product Destination | asynchronous motors |
| Range Of Product | Altivar 212 |
| Product Or Component Type | variable speed drive |
| Ip Degree Of Protection | IP21 |
| Motor Power Kw | 3 kW |
| Phase | 3 phase |
| Line Current | 4.9 A 480 V || 6.2 A 380 V |
| [Us] Rated Supply Voltage | 380...480 V - 15...10 % |
| Communication Port Protocol | METASYS N2 || LonWorks || Modbus || BACnet || APOGEE FLN |
| Supply Voltage Limits | 323-528 V |
| Product Specific Application | pumps and fans in HVAC |
| Emc Filter | Class C2 EMC filter integrated |
| Maximum Horse Power Rating | 4 hp |
| Device Short Name | ATV212 |
| Supply Frequency | 50...60 Hz - 5...5 % |
Per saperne di più
Weniger lesen
Weniger lesen
*Gli articoli nuovi sono coperti da una garanzia Obso di 24 mesi.
I nostri articoli usati in precedenza e le opzioni di riparazione sono coperti da 12 mesi di garanzia Obso.
“Servizio super! Tutto è stato elaborato in modo molto rapido e competente e il supporto personale è stato eccellente. Sceglierei sempre di nuovo Obso Automation! Molte grazie per l'ottimo supporto”. - MJ
I nostri articoli usati in precedenza e le opzioni di riparazione sono coperti da 12 mesi di garanzia Obso.
“Servizio super! Tutto è stato elaborato in modo molto rapido e competente e il supporto personale è stato eccellente. Sceglierei sempre di nuovo Obso Automation! Molte grazie per l'ottimo supporto”. - MJ
*La consegna e il ritiro il giorno stesso e successivo sono disponibili per le scorte delle nostre filiali nel Regno Unito e in Olanda. La consegna e il ritiro il giorno successivo e la consegna in 2 giorni sono disponibili per le scorte acquistate dai nostri partner. Nel 90% dei casi, se necessario, possiamo consegnare più velocemente del tempo previsto dal produttore.
Se necessario, sono disponibili anche opzioni standard per la consegna.
“Professionale, cortese e preciso. Pezzo obsoleto quotato il giorno stesso e fornito il giorno successivo” - PT
Se necessario, sono disponibili anche opzioni standard per la consegna.
“Professionale, cortese e preciso. Pezzo obsoleto quotato il giorno stesso e fornito il giorno successivo” - PT
Siamo accreditati ISO 9001 per garantire la tranquillità del vostro acquisto.
1
Step 1
Parte aggiunta per richiesta
2
Passo 2
Il vostro Account Manager personale è già al lavoro, fornendo risposte rapide e un servizio imbattibile.
3
Passo 3
Non ci limitiamo a elaborare gli ordini, ma garantiamo una consegna senza intoppi, piena trasparenza e zero grattacapi.
4
Passo 4
Più di 10.000 clienti si fidano di noi per un motivo. Richiedete subito il vostro preventivo e sperimentate l’automazione senza rischi, ritardi o incertezze.
