LC1D65T6

Home

Manufacturer Manufacturer Right arrow

SCHNEIDER ELECTRIC Term Right arrow

LC1D65T6

Schneider Electric

IEC contactor, TeSys D, nonreversing, 65A, 40HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 480VAC 60Hz coil, open style

AVAILABLE

GET A QUOTE NOW

Click to watch video

Click to view image

"TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 65A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC and 50HP at 600VAC three phase. Contactor is also rated for 5HP at 115VAC and 10HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 125A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 480 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.90 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product."

Read less

Specification	Value
Non-Overlap Time	1.5 ms on de-energisation between NC and NO contacts \|\| 1.5 ms on energisation between NC and NO contacts
Minimum Switching Current	5 mA for control circuit
Power Dissipation Per Pole	6.4 W AC-1
Average Impedance	1 mOhm - Ith 80 A 50 Hz for power circuit
Auxiliary Contact Composition	1 NO + 1 NC
Terminals Description Iso N°1	(21-22)NC \|\| (13-14)NO \|\| (A1-A2)CO
[Ith] Conventional Free Air Thermal Current	10 A (at 60 °C) for control circuit \|\| 80 A (at 60 °C) for power circuit
Control Circuit Voltage Limits	0.3...0.6 Uc 60-60 °C drop-out AC 50/60 Hz \|\| 0.85...1.1 Uc 60-60 °C operational AC 60 Hz
Mounting Support	plate \|\| rail
Control Circuit Type	AC 60 Hz
Safety Reliability Level	B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 \|\| B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Insulation Resistance	> 10 MOhm for control circuit
Rated Breaking Capacity	1000 A at 440 V for power circuit conforming to IEC 60947
Irms Rated Making Capacity	140 A AC for control circuit conforming to IEC 60947-5-1 \|\| 1000 A at 440 V for power circuit conforming to IEC 60947
Associated Fuse Rating	10 A gG for control circuit conforming to IEC 60947-5-1 \|\| 125 A gG at <= 690 V coordination type 1 for power circuit \|\| 125 A gG at <= 690 V coordination type 2 for power circuit
Inrush Power In Va	140-140 VA cos phi 0.75 (at 20 °C) \|\| 160-160 VA cos phi 0.75 (at 20 °C)
[Uimp] Rated Impulse Withstand Voltage	8 kV IEC 60947
Pole Contact Composition	3 NO
Connections - Terminals	control circuit: screw clamp terminal 1 1-4 mm² - cable stiffness: solid without cable end \|\| control circuit: screw clamp terminal 2 1-4 mm² - cable stiffness: solid without cable end \|\| control circuit: screw clamp terminal 1 1-2.5 mm² - cable stiffness: flexible without cable end \|\| control circuit: screw clamp terminal 2 1-2.5 mm² - cable stiffness: flexible without cable end \|\| control circuit: screw clamp terminal 1 1-4 mm² - cable stiffness: flexible with cable end \|\| control circuit: screw clamp terminal 2 1-4 mm² - cable stiffness: flexible with cable end \|\| power circuit: connector 1 2.5-35 mm² - cable stiffness: solid with cable end \|\| power circuit: connector 2 2.5-35 mm² - cable stiffness: solid with cable end \|\| power circuit: connector 1 2.5-35 mm² - cable stiffness: flexible without cable end \|\| power circuit: connector 2 2.5-25 mm² - cable stiffness: flexible without cable end \|\| power circuit: connector 1 2.5-35 mm² - cable stiffness: flexible with cable end \|\| power circuit: connector 2 2.5-35 mm² - cable stiffness: flexible with cable end
Coil Technology	without built-in bidirectional peak limiting diode suppressor
Operating Time	12...26 ms closing \|\| 4...19 ms opening
Minimum Switching Voltage	17 V for control circuit
Maximum Operating Rate	3600 cyc/h 60 °C
Tightening Torque	control circuit 1.2 N.m screw clamp terminal flat Ø 6 mm \|\| control circuit 1.2 N.m screw clamp terminal Philips No 2 \|\| power circuit 5 N.m screw clamp terminal flat Ø 6 mm \|\| power circuit 5 N.m screw clamp terminal flat Ø 8 mm \|\| control circuit 1.2 N.m screw clamp terminal pozidriv No 2
Mechanical Durability	6000000 cycles
Auxiliary Contacts Type	mirror contact 1 NC IEC 60947-4-1 \|\| mechanically linked 1 NO + 1 NC IEC 60947-5-1
Compatibility Code	LC1D
Hold-In Power Consumption In Va	13-13 VA 50 Hz cos phi 0.3 (at 20 °C) \|\| 15-15 VA 60 Hz cos phi 0.3 (at 20 °C)
Overvoltage Category	III
Maximum Horse Power Rating	10 hp at 230/240 V AC 60 Hz for 1 phase motors conforming to CSA \|\| 10 hp at 230/240 V AC 60 Hz for 1 phase motors conforming to UL \|\| 20 hp at 200/208 V AC 60 Hz for 3 phase motors conforming to CSA \|\| 20 hp at 200/208 V AC 60 Hz for 3 phase motors conforming to UL \|\| 20 hp at 230/240 V AC 60 Hz for 3 phase motors conforming to CSA \|\| 20 hp at 230/240 V AC 60 Hz for 3 phase motors conforming to UL \|\| 5 hp at 115 V AC 60 Hz for 1 phase motors conforming to CSA \|\| 5 hp at 115 V AC 60 Hz for 1 phase motors conforming to UL \|\| 50 hp at 460/480 V AC 60 Hz for 3 phase motors conforming to CSA \|\| 50 hp at 460/480 V AC 60 Hz for 3 phase motors conforming to UL \|\| 50 hp at 575/600 V AC 60 Hz for 3 phase motors conforming to CSA \|\| 50 hp at 575/600 V AC 60 Hz for 3 phase motors conforming to UL
Motor Power Kw	30 kW at 440 V AC 50/60 Hz \|\| 30 kW at 380...400 V AC 50/60 Hz \|\| 37 kW at 500 V AC 50/60 Hz \|\| 37 kW at 660...690 V AC 50/60 Hz \|\| 18.5 kW at 220...230 V AC 50/60 Hz \|\| 30 kW at 415 V AC 50/60 Hz \|\| 37 kW at 1000 V AC 50/60 Hz
[Ui] Rated Insulation Voltage	control circuit 600 V CSA \|\| control circuit 600 V UL \|\| power circuit 600 V CSA \|\| power circuit 600 V UL \|\| control circuit 690 V IEC 60947-1 \|\| power circuit 690 V IEC 60947-1
Heat Dissipation	4-5 W at 50/60 Hz for control circuit
Protective Cover	with
[Uc] Control Circuit Voltage	480 V AC 60 Hz
[Ue] Rated Operational Voltage	power circuit <= 690 V AC 25...400 Hz
Range Of Product	TeSys Deca
Contactor Application	motor control \|\| resistive load
Product Or Component Type	contactor
Range	TeSys
Utilisation Category	AC-3 \|\| AC-4 \|\| AC-1 \|\| AC-2 \|\| AC-3e
[Ie] Rated Operational Current	80 A (at <60 °C) at <= 440 V AC AC-1 for power circuit \|\| 65 A (at <60 °C) at <= 440 V AC AC-3 for power circuit \|\| 65 A (at <60 °C) at <= 440 V AC AC-3e for power circuit
Poles Description	3P
Device Short Name	LC1D

Read less

*New items come with up to 24 month Obso Warranty
Our previously used items and repair options come with 12 months Obso Warranty.

"Super service! Everything was processed very quickly and competently and the personal support was excellent. I would always choose Obso Automation again! Many thanks for the great support." - MJ

*Same & Next Day Delivery & Collection is available for stock from our UK and NL branches. Next-day delivery collection and 2 day delivery is available for stock sourced from our partners. In 90% of cases, we can deliver faster than the manufacturer’s ETA where required.

Standard options for delivery are also available where required.

"Professional, courteous and accurate. Obsolete part quoted same day and supplied next" - PT