8539SCASP3

Schneider Electric

NEMA Combination Starter, Type S, HHL electronic motor circuit protector, Size 1, 27A, 3 phase, 120VAC coil, NEMA 12

Verfügbar

Jetzt Angebot einholen

  • "Type S non-reversing MCP combination starters are for motor control applications. Combination starters combine the requirements for motor overload and short circuit protection into one package. NEMA Size 1 starters have ratings of 0.25 to 5 HP at 200, 0.25 at 230 VAC and 0.25 to 10 HP at 460 and 575 VAC poly phase. Combination starter has an electronic motor circuit protector (MCP). This 3 pole starter is for poly phase applications. Combination starters are available with a wide variety of replaceable coil voltages. Starter has a 110/120 VAC 50/60 Hz operating coil wired for separate control. The melting alloy type overload relay uses Type B thermal units to sense over current conditions. A painted sheet steel NEMA 12/3R dust tight and drip tight enclosure is used to protect this combination starter. Enclosure is 24.00 inches tall, 9.50 inches wide and 9.34 inches deep. A wide variety of accessories are available for Type S starters. This combination starter has a Hand Off Auto selector switch. This combination starter also has a red LED pilot light, a green LED pilot light and two normally open and two normally closed auxiliary contact. Has a SPDT electrical interlock on circuit breaker operating mechanism. It is normally used to disconnect separate control circuit when disconnect is switched to off position. Type S combination starters are UL listed and CSA certified."
Lesen Sie mehr arrow Weniger lesen arrow
Specification Value
Thermal Overload Type melting alloy 3
Height 24.24 in
Auxiliary Contact Composition 2 NO + 2 NC
Control Type selector switch HAND-OFF-AUTO)
Circuit Breaker Type eMCP
Maximum Horse Power Rating 0.25-5 hp 200 V AC, 3 phase || 0.25-7.5 hp 230 V AC, 3 phase || 0.25-10 hp 460 V AC, 3 phase || 0.25-10 hp 575 V AC, 3 phase
[Uc] Control Circuit Voltage 110 V AC 50 Hz || 120 V AC 60 Hz
Length 3.25 in
Disconnector Device Type circuit breaker, 30 A, electrical SPDT
Motor Starter Type non reversing
Local Signalling red indicator on LED || green indicator off LED
Poles Description 3P
Width 9.62 in
Depth 9.84 in
Breaking Capacity 100 kA 480 V AC || 35 kA 600 V AC
[Ue] Rated Operational Voltage 600 V AC
Range Of Product S
Product Or Component Type Combination Starter
Control Circuit separate control circuit
Lesen Sie mehr arrow Weniger lesen arrow
*Neue Artikel haben bis zu 24 Monate Obso-Garantie
Auf unsere gebrauchten Artikel und Reparaturoptionen gewähren wir 12 Monate Obso-Garantie.


„Super Service! Alles wurde sehr schnell und kompetent abgewickelt und die persönliche Betreuung war hervorragend. Ich würde mich jederzeit wieder für Obso Automation entscheiden! Vielen Dank für die tolle Unterstützung.“ - MJ
*Die Lieferung und Abholung am selben oder nächsten Tag ist für Lagerbestände in unseren Niederlassungen in Großbritannien und den Niederlanden möglich. Abholung am nächsten Tag und Lieferung innerhalb von 2 Tagen ist möglich, wenn die Ware von unseren Partnern bezogen wird. In 90 % der Fälle können wir bei Bedarf schneller liefern als die vom Hersteller angegebene Lieferfrist.

Bei Bedarf sind auch Standardoptionen für die Lieferung verfügbar.


„Professionell, zuvorkommend und genau. Veraltetes Teil am selben Tag angeboten und am nächsten Tag geliefert“ - PT
Wir sind ISO 9001-zertifiziert, so dass Sie sich bei Ihrem Kauf keine Sorgen machen müssen.

Was unsere Kunden über uns sagen

Trustpilot

1

Step 1

    Bauteil zur Anfrage hinzugefügt

    2

    Seite 2

    Ihr persönlicher Kundenbetreuer ist bereits dabei und sorgt für schnelle Antworten und einen unschlagbaren Service.

    3

    Seite 3

    Wir wickeln nicht nur Aufträge ab – wir garantieren eine reibungslose Lieferung, volle Transparenz und keine Kopfschmerzen.

    4

    Seite 4

    Mehr als 10.000 Kunden vertrauen uns aus gutem Grund. Fordern Sie jetzt Ihr Angebot an und erleben Sie Automatisierung ohne Risiko, Verzögerungen oder Unsicherheit.