ILS1F573PC1A0

Home

Manufacturer Manufacturer Right arrow

SCHNEIDER ELECTRIC Term Right arrow

ILS1F573PC1A0

Schneider Electric

integrated drive ILS with stepper motor - 24..36 V - CANopen DS301 - 3.5A

AVAILABLE

GET A QUOTE NOW

"This product is part of the Lexium ILA, ILE, ILS range, an offer of motion integrated drives for motion control. The integrated motion drive with a 6-pole stepper motor features an integrated CANopen DS301 communication interface. It is equipped with a single turn encoder (16384 points/turn) and reference pulse sensor (zero marker). Integration of the motor and the control electronics reduces the installation costs. The 3-phase stepper motor with a rated supply voltage of 24V to 36V DC, a maximum current consumption of 8500mA and a nominal speed of 500RPM at 36V. It provides high speed of rotation and medium torque with untapped shaft end. It is furnished with industrial connector for electrical connection. It is an IP41 (shaft bushing) and IP54 (total except shaft bushing) rated product. Its dimensions are 138.9mm (Length) x 57mm (Width), 8mm x 21mm shaft, centring collar dimensions are 1.6mm (Depth) x 38.1mm (Diameter) with 66.6mm circle diameter of the mounting hole. It weighs 2kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, electronics manufacture and medical technology applications. This product is certified by CE, TUV, CUL and UL. It meets EN/IEC 61800-3, EN 61800-3, 2001, second environment, IEC 60072-1, EN/IEC 50178, EN 61800-3, 2001-02, IEC 61800-3, Ed 2 and EN 50347 standards. It supports 57mm flange mount with a natural convection cooling system. Lexium integrated drives integrate motor, positioning controller, power electronics, fieldbus and safety function in a single device. Each motor technology offers a wide range of applications for decentralised motion solutions. The following operating modes can be set via the communication bus such as electronic gearbox (for drive ILA1x57 with single turn encoder), speed profile, manual (JOG), point-to-point and homing."

Read less

Specification	Value
Circle Diameter Of The Mounting Holes	66.6 mm
Current Consumption	3500 mA maximum
Maximum Mechanical Speed	3000 rpm
Maximum Switching Current	100 mA per output \|\| 200 mA total
Maximum Radial Force Fr	50 N
Mounting Support	flange
Number Of Motor Stacks	3
Rotor Inertia	0.38 kg.cm²
Continuous Stall Torque	1.5 N.m
Centring Collar Depth	1.6 mm
Discrete Input Current	10-10 mA at 24 V on/STO_A safety input \|\| 3-3 mA at 24 V on/STO_B safety input \|\| 2-2 mA at 24 V 24 V signal interface
Second Shaft	without second shaft end
Marking	CE
Shaft Length	21 mm
Net Weight	2 kg
Voltage State 0 Guaranteed	-3...4.5 V
Centring Collar Diameter	38.1 mm
Motor Flange Size	57 mm
Peak Stall Torque	1.5 N.m
Number Of Mounting Holes	4
Shaft Diameter	8 mm
Discrete Output Voltage	23...25 V
Supply Voltage Limits	18-40 V
Mounting Holes Diameter	5.2 mm
Speed Feedback Resolution	20000 points/turn
Type Of Cooling	natural convection
Service Life In Hours	20000 h bearing
Shaft End	untapped
Feedback Type	index pulse
Protection Type	overload of output voltage \|\| short circuit of the output voltage \|\| safe torque off
Transmission Rate	50, 100, 125, 250, 500, 800 and 1000 kbauds
Accuracy Error	+/- 6 arc min
Input/Output Type	4 signals (each be used as input or output)
Maximum Axial Force Fa	100 N tensile force) \|\| 8.4 N force pressure)
Associated Fuse Rating	10 A
Voltage State 1 Guaranteed	15...30 V
Range Of Product	Lexium integrated drive
Holding Torque	1.7 N.m
Network Type	DC
Winding Type	medium speed of rotation and medium torque
Number Of Motor Poles	6
Holding Brake	without
Product Or Component Type	motion integrated drive
Phase	single phase
Length	138.9 mm
[Us] Rated Supply Voltage	36 V \|\| 24 V
Communication Interface	CANopen DS301, Integrated
Gear Box Type	without
Motor Type	3-phase stepper motor
Nominal Speed	200 rpm 24 V \|\| 500 rpm 36 V
Electrical Connection	industrial connector
Nominal Torque	1.5 N.m
Device Short Name	ILS

Read less

*New items come with up to 24 month Obso Warranty
Our previously used items and repair options come with 12 months Obso Warranty.

"Super service! Everything was processed very quickly and competently and the personal support was excellent. I would always choose Obso Automation again! Many thanks for the great support." - MJ

*Same & Next Day Delivery & Collection is available for stock from our UK and NL branches. Next-day delivery collection and 2 day delivery is available for stock sourced from our partners. In 90% of cases, we can deliver faster than the manufacturer’s ETA where required.

Standard options for delivery are also available where required.

"Professional, courteous and accurate. Obsolete part quoted same day and supplied next" - PT