Google Reviews
TrustPilot Reviews
ATV212HD11M3X
variable speed drive, Altivar 212, 11kW, 15hp, 240V, 3 phases, without EMC, IP21
AVAILABLE
GET A QUOTE NOW
Click to watch video 
This Altivar 212 variable speed drive can feed 3-phase asynchronous motors. Its protection index is IP21. It works at a rated power up to 11kW / 15hp and a rated voltage from 200V to 240V AC. Its design is based on eco-energy with a reduction in energy consumption of up to 70% compared to a conventional control system. Thanks to its cable temperature rise reduction technology, the Altivar 212 drive offers immediate, disturbance-free operation avoiding additional options such as a line choke or DC choke to deal with current harmonics. It weighs 11.55kg and its dimensions are, 245mm wide, 330mm high, 190mm deep. It is specifically designed for the most common fluid management applications in tertiary sector buildings (HVAC) like heating, ventilation, air conditioning and pumping. It conforms to international standards IEC/EN 61800-5-1 and IEC/EN 61800-3 (immunity and conducted and radiated EMC emissions). It is also CE, UL, CSA, C-Tick and NOM certified. The Altivar 212 offers optional motor chokes which can increase the maximum cable lengths between the drive and the motor and limit disturbance at the motor terminals. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. The Altivar 212 drive can easily be adapted to all building management systems thanks to its numerous functions and communication protocols integrated as standard, Modbus, METASYS N2, APOGEE FLN P1 and BACnet.
Read more
Read less
Read less
| Specification | Value |
|---|---|
| Prospective Line Isc | 22 kA |
| Electrical Connection | VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 2.5-2.5 mm² / AWG 14 || L1/R, L2/S, L3/T terminal 25-25 mm² / AWG 3 |
| Network Frequency | 47.5...63 Hz |
| Discrete Input Logic | positive logic (source) F, R, RES), <= 5 V, >= 11 V || negative logic (sink) F, R, RES), >= 16 V, <= 10 V |
| Type Of Cable | without mounting kit 1 IEC cable 45 °C, copper 90 °C / XLPE/EPR || without mounting kit 1 IEC cable 45 °C, copper 70 °C / PVC || with UL Type 1 kit 3 UL 508 cable 40 °C, copper 75 °C / PVC |
| Height | 330 mm |
| Acceleration And Deceleration Ramps | automatic based on the load || linear adjustable separately from 0.01 to 3200 s |
| Analogue Output Type | FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bits || FM switch-configurable current 0...20 mA 970 Ohm 10 bits |
| Speed Drive Output Frequency | 0.5-200 Hz |
| Discrete Output Type | configurable relay logic FLA, FLC) NO - 100000 cycles || configurable relay logic FLB, FLC) NC - 100000 cycles || configurable relay logic RY, RC) NO - 100000 cycles |
| Transmission Frame | RTU |
| Torque Accuracy | +/- 15 % |
| Asynchronous Motor Control Profile | flux vector control without sensor, standard || voltage/frequency ratio, 2 points || voltage/frequency ratio, 5 points || voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) || voltage/frequency ratio - Energy Saving, quadratic U/f |
| Maximum Switching Current | 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R) || 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R) || 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R) || 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R) |
| Communication Service | read device identification (43) || monitoring inhibitable || read holding registers (03) 2 words maximum || write multiple registers (16) 2 words maximum || write single register (06) || time out setting from 0.1 to 100 s |
| Transient Overtorque | 120-120 % of nominal motor torque +/- 10 % 60 s |
| Insulation Resistance | >= 1 mOhm 500 V DC for 1 minute |
| Response Time | FM 2 ms +/- 0.5 ms analog || FLA, FLC 7 ms +/- 0.5 ms discrete || FLB, FLC 7 ms +/- 0.5 ms discrete || RY, RC 7 ms +/- 0.5 ms discrete |
| Data Format | 8 bits, 1 stop, odd even or no configurable parity |
| Apparent Power | 17.6 kVA 240 V |
| Dielectric Strength | 2830 V DC between earth and power terminals || 4230 V DC between control and power terminals |
| Power Range | 7-11 kW 200-240 V 3 phase |
| Net Weight | 11.55 kg |
| Type Of Polarization | no impedance |
| Frequency Resolution | display unit 0.1 Hz || analog input 0.024/50 Hz |
| Accuracy | +/- 0.6 % VIA) for a temperature variation 60 °C || +/- 0.6 % VIB) for a temperature variation 60 °C || +/- 1 % FM) for a temperature variation 60 °C |
| Switching Frequency | 6...16 kHz adjustable || 12...16 kHz with derating factor |
| Maximum Transient Current | 50.8 A 60 s |
| Connector Type | 1 open style || 1 RJ45 |
| Analogue Input Number | 2 |
| Motor Slip Compensation | automatic whatever the load || adjustable || not available in voltage/frequency ratio motor control |
| Motor Starter Type | variable speed drive |
| Discrete Output Number | 2 |
| Minimum Switching Current | 3 mA 24 V DC configurable relay logic |
| Analogue Output Number | 1 |
| Physical Interface | 2-wire RS 485 |
| Power Dissipation In W | 459 W |
| Continuous Output Current | 46.2 A 230 V |
| Number Of Addresses | 1-247 |
| Tightening Torque | 0.6 N.m VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) || 4.5 N.m, 40 lb.in L1/R, L2/S, L3/T) |
| Discrete Input Type | F programmable 24 V DC level 1 PLC 4700 Ohm || R programmable 24 V DC level 1 PLC 4700 Ohm || RES programmable 24 V DC level 1 PLC 4700 Ohm |
| Speed Range | 1-10 |
| Isolation | electrical between power and control |
| Local Signalling | for DC bus energized 1 LED (red) |
| Linearity Error | VIA +/- 0.15 % of maximum value input || VIB +/- 0.15 % of maximum value input || FM +/- 0.2 % output |
| Specific Application | HVAC |
| Output Voltage | <= power supply voltage |
| Nominal Switching Frequency | 12 kHz |
| Width | 245 mm |
| Transmission Rate | 9600 bps or 19200 bps |
| Braking To Standstill | by DC injection |
| Air Flow | 157 m3/h |
| Depth | 190 mm |
| Protection Type | overheating protection drive || thermal power stage drive || short-circuit between motor phases drive || input phase breaks drive || overcurrent between output phases and earth drive || overvoltages on the DC bus drive || break on the control circuit drive || against exceeding limit speed drive || line supply overvoltage and undervoltage drive || line supply undervoltage drive || against input phase loss drive || thermal protection motor || motor phase break motor || with PTC probes motor |
| Supply | internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection || internal supply 24 V DC 21-27 V), <200 A overload and short-circuit protection |
| Analogue Input Type | VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits || VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits || VIB configurable PTC probe 0...6 probes 1500 Ohm || VIA switch-configurable current 0...20 mA 250 Ohm 10 bits |
| Discrete And Process Manufacturing | building - HVAC compressor for scroll || building - HVAC fan || building - HVAC pump |
| Sampling Duration | 2 ms +/- 0.5 ms F discrete || 2 ms +/- 0.5 ms R discrete || 2 ms +/- 0.5 ms RES discrete || 3.5 ms +/- 0.5 ms VIA analog || 22 ms +/- 0.5 ms VIB analog |
| Speed Accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
| Option Card | communication card LonWorks |
| Product Destination | asynchronous motors |
| Range Of Product | Altivar 212 |
| Product Or Component Type | variable speed drive |
| Ip Degree Of Protection | IP21 |
| Motor Power Kw | 11 kW |
| Phase | 3 phase |
| Line Current | 34.4 A 240 V || 42.1 A 200 V |
| [Us] Rated Supply Voltage | 200...240 V - 15...10 % |
| Communication Port Protocol | Modbus || LonWorks || METASYS N2 || BACnet || APOGEE FLN |
| Supply Voltage Limits | 170-264 V |
| Product Specific Application | pumps and fans in HVAC |
| Emc Filter | without EMC filter |
| Maximum Horse Power Rating | 15 hp |
| Device Short Name | ATV212 |
| Supply Frequency | 50...60 Hz - 5...5 % |
Read more
Read less
Read less
*New items come with up to 24 month Obso Warranty
Our previously used items and repair options come with 12 months Obso Warranty.
"Super service! Everything was processed very quickly and competently and the personal support was excellent. I would always choose Obso Automation again! Many thanks for the great support." - MJ
Our previously used items and repair options come with 12 months Obso Warranty.
"Super service! Everything was processed very quickly and competently and the personal support was excellent. I would always choose Obso Automation again! Many thanks for the great support." - MJ
*Same & Next Day Delivery & Collection is available for stock from our UK and NL branches. Next-day delivery collection and 2 day delivery is available for stock sourced from our partners. In 90% of cases, we can deliver faster than the manufacturer’s ETA where required.
Standard options for delivery are also available where required.
"Professional, courteous and accurate. Obsolete part quoted same day and supplied next" - PT
Standard options for delivery are also available where required.
"Professional, courteous and accurate. Obsolete part quoted same day and supplied next" - PT
We are ISO 9001 accredited so you have peace of mind with your purchase.
1
Step 1
Part added for enquiry
2
Step 2
Your personal Account Manager is already on it, delivering rapid responses and unbeatable service.
3
Step 3
We don’t just process orders—we guarantee smooth delivery, full transparency, and zero headaches.
4
Step 4
Our 10,000+ customers trust us for a reason. Get your quote now and experience automation without risk, delays, or uncertainty.
