ATV12PU40M3

Home

ATV12PU40M3

variable speed drive, Altivar 12, 4kW, 5hp, 3 phases, 200 to 240V, on base plate

AVAILABLE

GET A QUOTE NOW

Altivar Machine ATV12 is an offer of variable speed drives for commercial equipment and simple machines. The drive can feed three-phase asynchronous motors. It works at a rated power up to 4kW, and a rated voltage from 200V to 240V. It has advanced PID and catch on the fly functions, basic cabling, and easy motor control setting. Based on the needs, it can be delivered without heatsink, with embedded EMC filter, or as standard version. The Altivar 12 drive integrates as standard the Modbus communication protocol. It weighs 1.6kg. This Altivar Machine ATV12 is designed for simple applications, in industry, commercial machines and HVAC machines such as conveyors, pumps, extractors, access barriers and treadmills. It conforms to IEC, UL and other international standards. SoMove software compatibility enables saving and transfering of configurations to spare drive, thus reducing maintenance downtime. This reference is sold individually. ATV12 can be installed alone or side by side in a multi-drive configuration. The ATV12 range meets basic machine requirements united with simplicity.

Read less

Specification	Value
Prospective Line Isc	5 kA
Network Frequency	50-60 Hz
Power Dissipation In W	natural 128.0 W
Line Current	23.8 A 100 V heavy duty) \|\| 19.9 A 120 V heavy duty)
Asynchronous Motor Control Profile	quadratic voltage/frequency ratio \|\| sensorless flux vector control \|\| voltage/frequency ratio (V/f)
4 Quadrant Operation Possible	false
Relative Symmetric Network Frequency Tolerance	5 %
Apparent Power	8.3 kVA 240 V heavy duty)
Net Weight	1.6 kg
With Safety Function Safe Direction (Sdi)	false
Type Of Polarization	no impedance
Frequency Resolution	analog input converter A/D, 10 bits \|\| display unit 0.1 Hz
Switching Frequency	2...16 kHz adjustable \|\| 4...16 kHz with derating factor
Maximum Transient Current	25.0 A 60 s heavy duty) \|\| 27.6 A 2 s heavy duty)
Communication Service	read holding registers (03) 29 words \|\| write single register (06) 29 words \|\| write multiple registers (16) 27 words \|\| read/write multiple registers (23) 4/4 words \|\| read device identification (43)
Analogue Input Number	1
Motor Slip Compensation	preset in factory \|\| adjustable
Discrete Output Number	2
With Safety Function Safe Position (Sp)	false
Method Of Access	server Modbus serial
With Safety Function Safely Limited Position (Slp)	false
With Safety Function Safe Operating Stop (Sos)	false
Number Of Addresses	1-247
Speed Range	1-20
Discrete Input Number	4
Linearity Error	+/- 0.3 % of maximum value analogue input
With Sft Fct Safe Stop 2 (Ss2)	false
With Safety Function Safe Stop 1 (Ss1)	false
Width	140 mm
Transmission Rate	9.6 kbit/s \|\| 19.2 kbit/s \|\| 38.4 kbit/s
Depth	100.2 mm
Sampling Duration	20 ms +/- 1 ms logic input \|\| 10 ms analogue input
Maximum Output Frequency	4 kHz
With Safety Function Safe Brake Management (Sbc/Sbt)	false
Height	184 mm
Acceleration And Deceleration Ramps	S \|\| linear from 0 to 999.9 s \|\| U
Time Constant	20 ms +/- 1 ms for reference change
Maximum Output Voltage	240 V
Base Load Current At High Overload	16.7 A
Speed Drive Output Frequency	0.5-400 Hz
Transmission Frame	RTU
With Safety Function Safe Speed Monitor (Ssm)	false
Relay Output Number	1
Transient Overtorque	150-170 % of nominal motor torque depending on drive rating and type of motor
With Safety Function Safe Torque Off (Sto)	false
Data Format	8 bits, configurable odd, even or no parity
Connector Type	1 RJ45
Analogue Output Number	1
Physical Interface	2-wire RS 485
Insulation	electrical between power and control
Tightening Torque	1.2 N.m
Continuous Output Current	16.7 A 4 kHz
With Safety Function Safe Programmable Logic	false
Brake Chopper Integrated	false
Nominal Switching Frequency	4 kHz
Quantity Per Set	set of 1
Braking To Standstill	by DC injection
Protection Type	line supply overvoltage \|\| line supply undervoltage \|\| overcurrent between output phases and earth \|\| overheating protection \|\| short-circuit between motor phases \|\| against input phase loss in three-phase \|\| thermal motor protection via the drive by continuous calculation of I²t
With Safety Function Safely Limited Speed (Sls)	false
Product Or Component Type	variable speed drive
Ip Degree Of Protection	IP20
Communication Port Protocol	Modbus
Nominal Output Current	16.7 A
Product Specific Application	simple machine
Maximum Horse Power Rating	5 hp
Supply Frequency	50/60 Hz +/- 5 %
Range Of Product	Altivar 12
Motor Power Kw	4 kW
[Us] Rated Supply Voltage	200...240 V - 15...10 %
Mounting Mode	cabinet mount
Emc Filter	without EMC filter

Read less

*New items come with up to 24 month Obso Warranty
Our previously used items and repair options come with 12 months Obso Warranty.

"Super service! Everything was processed very quickly and competently and the personal support was excellent. I would always choose Obso Automation again! Many thanks for the great support." - MJ

*Same & Next Day Delivery & Collection is available for stock from our UK and NL branches. Next-day delivery collection and 2 day delivery is available for stock sourced from our partners. In 90% of cases, we can deliver faster than the manufacturer’s ETA where required.

Standard options for delivery are also available where required.

"Professional, courteous and accurate. Obsolete part quoted same day and supplied next" - PT