LC1D80008U7

Strona główna Home Right arrow

Producent

SCHNEIDER ELECTRIC Term Right arrow

LC1D80008U7

Schneider Electric

IEC contactor, TeSys Deca, nonreversing, 125A resistive, 4 pole, 2 NO and 2 NC, 240VAC 50/60 Hz coil, open style

Dostępny

Uzyskaj wycenę już teraz

Kliknij, aby obejrzeć wideo

Kliknij, aby wyświetlić obraz

"TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 110A resistive load rating. Contactor is supplied with a 240 VAC 50/60 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.78 inches wide and 5.51 inches deep. It weighs 4.06 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product."

Więcej informacji

Czytaj mniej

Specification	Value
Power Dissipation Per Pole	12.5 W AC-1
Average Impedance	0.8 mOhm - Ith 125 A 50 Hz for power circuit
[Ith] Conventional Free Air Thermal Current	125 A (at 60 °C) for power circuit
Control Circuit Voltage Limits	0.85...1.1 Uc -40-55 °C operational AC 60 Hz \|\| 0.3...0.6 Uc -40-55 °C drop-out AC 50/60 Hz \|\| 0.8...1.1 Uc -40-55 °C operational AC 50 Hz
Mounting Support	plate \|\| rail
Contact Compatibility	M1
Control Circuit Type	AC 50/60 Hz
Safety Reliability Level	B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 \|\| B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Pollution Degree	3
Rated Breaking Capacity	1100 A at 440 V for power circuit conforming to IEC 60947
Irms Rated Making Capacity	1100 A at 440 V for power circuit conforming to IEC 60947
Associated Fuse Rating	200 A gG at <= 690 V coordination type 1 for power circuit \|\| 160 A gG at <= 690 V coordination type 2 for power circuit
Inrush Power In Va	245-245 VA 60 Hz cos phi 0.75 (at 20 °C) \|\| 245-245 VA 50 Hz cos phi 0.75 (at 20 °C)
[Uimp] Rated Impulse Withstand Voltage	8 kV IEC 60947
Pole Contact Composition	2 NO + 2 NC
Connections - Terminals	control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end \|\| control circuit: screw clamp terminals 1 1-2.5 mm² - cable stiffness: flexible with cable end \|\| control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end \|\| control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: flexible without cable end \|\| control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: solid without cable end \|\| control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: solid without cable end \|\| power circuit: connector 1 4-50 mm² - cable stiffness: flexible without cable end \|\| power circuit: connector 2 4-25 mm² - cable stiffness: flexible without cable end \|\| power circuit: connector 1 4-50 mm² - cable stiffness: flexible with cable end \|\| power circuit: connector 2 4-16 mm² - cable stiffness: flexible with cable end \|\| power circuit: connector 1 4-50 mm² - cable stiffness: solid without cable end \|\| power circuit: connector 2 4-25 mm² - cable stiffness: solid without cable end
Coil Technology	without built-in suppressor module
Operating Time	20...35 ms closing \|\| 6...20 ms opening
Maximum Operating Rate	3600 cyc/h 60 °C
Tightening Torque	control circuit 1.2 N.m screw clamp terminals flat Ø 6 mm \|\| control circuit 1.2 N.m screw clamp terminals Philips No 2 \|\| power circuit 12 N.m connector flat Ø 6 to Ø 8 mm \|\| power circuit 12 N.m connector hexagonal 4 mm \|\| control circuit 1.2 N.m screw clamp terminals pozidriv No 2
Electrical Durability	0.8 Mcycles 125 A AC-1 <= 440 V
Mechanical Durability	4 Mcycles
Compatibility Code	LC1D
Hold-In Power Consumption In Va	26-26 VA 60 Hz cos phi 0.3 (at 20 °C) \|\| 26-26 VA 50 Hz cos phi 0.3 (at 20 °C)
Overvoltage Category	III
[Ui] Rated Insulation Voltage	power circuit 600 V CSA \|\| power circuit 600 V UL \|\| power circuit 1000 V IEC 60947-4-1
[Icw] Rated Short-Time Withstand Current	640 A 40 °C - 10 s for power circuit \|\| 990 A 40 °C - 1 s for power circuit \|\| 135 A 40 °C - 10 min for power circuit \|\| 320 A 40 °C - 1 min for power circuit
Heat Dissipation	6-10 W at 50/60 Hz
Protective Cover	without
[Uc] Control Circuit Voltage	240 V AC 50/60 Hz
[Ue] Rated Operational Voltage	power circuit <= 690 V AC 25...400 Hz
Range Of Product	TeSys Deca
Contactor Application	resistive load
Product Or Component Type	contactor
Range	TeSys
Utilisation Category	AC-1
[Ie] Rated Operational Current	125 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
Poles Description	4P
Device Short Name	LC1D

Więcej informacji

Czytaj mniej

*Nowe produkty są objęte 24-miesięczną gwarancją Obso.
Nasze wcześniej używane produkty i opcje naprawy są objęte 12-miesięczną gwarancją Obso.

„Super obsługa! Wszystko zostało przetworzone bardzo szybko i kompetentnie, a osobiste wsparcie było doskonałe. Zawsze ponownie wybrałbym Obso Automation! Wielkie dzięki za świetne wsparcie.” - MJ

*Dostawa i odbiór tego samego i następnego dnia są dostępne dla towarów z naszych oddziałów w Wielkiej Brytanii i Holandii. Odbiór następnego dnia i dostawa w ciągu 2 dni są dostępne dla towarów pochodzących od naszych partnerów. W 90% przypadków możemy dostarczyć towar szybciej niż przewidywany czas dostawy producenta.

W razie potrzeby dostępne są również standardowe opcje dostawy.

„Profesjonalny, uprzejmy i dokładny. Przestarzała część wyceniona tego samego dnia i dostarczona następnego” - PT