ATV12HU30M3

Strona główna Term Right arrow

ATV12HU30M3

variable speed drive, Altivar 12, 3kW, 200 to 240V, 3 phases, with heat sink

Dostępny

Uzyskaj wycenę już teraz

This Altivar 12 variable speed drive can feed 3-phase asynchronous motors in supply line connection. It works at a rated power up to 3kW / 4hp and a rated voltage from 200V to 240V AC. It is designed with heatsink for normal environments and fan-cooled enclosure. Transient overtorque function prevents stoppages by unjamming the machine with extra torque, when needed, this reduces downtime and maintenance costs. It features underload and overload detection, this contribute to protect your installation. The Altivar 12 drive integrates as standard the Modbus communication protocol, which can be accessed via the RJ45 connector located on the underside of the drive. It is designed for simple industry and commercial machines and appliances, such as conveyors, pumps, extractors, access barriers and treadmills. SoMove software compatibility enables saving and transfering of configurations to spare drive, reducing maintenance downtime. It features an optimized application of power and torque for ventilation and pumping applications, this allows up to 30% energy savings.

Więcej informacji

Czytaj mniej

Specification	Value
Prospective Line Isc	5 kA
Network Frequency	50-60 Hz
Power Dissipation In W	forced cooling 94.0 W
Line Current	19.0 A 100 V heavy duty) \|\| 15.9 A 120 V heavy duty)
Asynchronous Motor Control Profile	sensorless flux vector control \|\| quadratic voltage/frequency ratio \|\| voltage/frequency ratio (V/f)
4 Quadrant Operation Possible	false
Relative Symmetric Network Frequency Tolerance	5 %
Apparent Power	6.6 kVA 240 V heavy duty)
Net Weight	2 kg
With Safety Function Safe Direction (Sdi)	false
Type Of Polarization	no impedance
Frequency Resolution	analog input converter A/D, 10 bits \|\| display unit 0.1 Hz
Switching Frequency	2...16 kHz adjustable \|\| 4...16 kHz with derating factor
Maximum Transient Current	18.3 A 60 s heavy duty) \|\| 20.1 A 2 s heavy duty)
Communication Service	read holding registers (03) 29 words \|\| write single register (06) 29 words \|\| write multiple registers (16) 27 words \|\| read/write multiple registers (23) 4/4 words \|\| read device identification (43)
Analogue Input Number	1
Motor Slip Compensation	adjustable \|\| preset in factory
Discrete Output Number	2
With Safety Function Safe Position (Sp)	false
Method Of Access	server Modbus serial
With Safety Function Safely Limited Position (Slp)	false
With Safety Function Safe Operating Stop (Sos)	false
Number Of Addresses	1-247
Speed Range	1-20
Discrete Input Number	4
Linearity Error	+/- 0.3 % of maximum value analogue input
With Sft Fct Safe Stop 2 (Ss2)	false
With Safety Function Safe Stop 1 (Ss1)	false
Width	140 mm
Transmission Rate	9.6 kbit/s \|\| 19.2 kbit/s \|\| 38.4 kbit/s
Depth	141.2 mm
Sampling Duration	20 ms +/- 1 ms logic input \|\| 10 ms analogue input
Maximum Output Frequency	4 kHz
With Safety Function Safe Brake Management (Sbc/Sbt)	false
Height	184 mm
Acceleration And Deceleration Ramps	linear from 0 to 999.9 s \|\| S \|\| U
Time Constant	20 ms +/- 1 ms for reference change
Maximum Output Voltage	240 V
Base Load Current At High Overload	12.2 A
Speed Drive Output Frequency	0.5-400 Hz
Transmission Frame	RTU
With Safety Function Safe Speed Monitor (Ssm)	false
Relay Output Number	1
Transient Overtorque	150-170 % of nominal motor torque depending on drive rating and type of motor
With Safety Function Safe Torque Off (Sto)	false
Data Format	8 bits, configurable odd, even or no parity
Connector Type	1 RJ45
Analogue Output Number	1
Physical Interface	2-wire RS 485
Insulation	electrical between power and control
Tightening Torque	1.2 N.m
Continuous Output Current	12.2 A 4 kHz
With Safety Function Safe Programmable Logic	false
Brake Chopper Integrated	false
Nominal Switching Frequency	4 kHz
Quantity Per Set	set of 1
Braking To Standstill	by DC injection
Protection Type	line supply overvoltage \|\| line supply undervoltage \|\| overcurrent between output phases and earth \|\| overheating protection \|\| short-circuit between motor phases \|\| against input phase loss in three-phase \|\| thermal motor protection via the drive by continuous calculation of I²t
With Safety Function Safely Limited Speed (Sls)	false
Product Or Component Type	variable speed drive
Ip Degree Of Protection	IP20
Communication Port Protocol	Modbus
Nominal Output Current	12.2 A
Product Specific Application	simple machine
Maximum Horse Power Rating	4 hp
Supply Frequency	50/60 Hz +/- 5 %
Range Of Product	Altivar 12
Motor Power Kw	3 kW
[Us] Rated Supply Voltage	200...240 V - 15...10 %
Mounting Mode	cabinet mount
Emc Filter	without EMC filter

Więcej informacji

Czytaj mniej

*Nowe produkty są objęte 24-miesięczną gwarancją Obso.
Nasze wcześniej używane produkty i opcje naprawy są objęte 12-miesięczną gwarancją Obso.

„Super obsługa! Wszystko zostało przetworzone bardzo szybko i kompetentnie, a osobiste wsparcie było doskonałe. Zawsze ponownie wybrałbym Obso Automation! Wielkie dzięki za świetne wsparcie.” - MJ

*Dostawa i odbiór tego samego i następnego dnia są dostępne dla towarów z naszych oddziałów w Wielkiej Brytanii i Holandii. Odbiór następnego dnia i dostawa w ciągu 2 dni są dostępne dla towarów pochodzących od naszych partnerów. W 90% przypadków możemy dostarczyć towar szybciej niż przewidywany czas dostawy producenta.

W razie potrzeby dostępne są również standardowe opcje dostawy.

„Profesjonalny, uprzejmy i dokładny. Przestarzała część wyceniona tego samego dnia i dostarczona następnego” - PT