ATSU01N232LT

Home

Manufacturer Manufacturer Right arrow

SCHNEIDER ELECTRIC Term Right arrow

ATSU01N232LT

soft starter for asynchronous motor, Altistart U01, TeSys U, ATSU01, 32A, 200 to 480V, 7.5 to 15kW

AVAILABLE

GET A QUOTE NOW

The Altistart U01 soft start/soft stop unit can feed 3-phase asynchronous motors. It is designed primarily for combinations with TeSys U starter-controllers. It can be used for a motor rated power up to 20hp for 3-phase (200V to 480V AC) and up to 32A rating. It is 45mm wide, this makes it one of the smallest soft starters on the market, it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Its protection index is IP20. It weighs 0.49kg and its dimensions are, 45mm wide, 314mm high, 170mm deep. The Altistart U01 is designed for the following simple applications like conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It complies with standards IEC/EN 60947-4-2, and carries UL, CSA, C-Tick, and CCC certifications, and CE marking. It can be easily combined with a TeSys U controller by means of the power connector VW3G4104. It is easy to install on a DIN rail. Altistart 01 combines simplicity with easy cabling, fast configuration and efficiency. Reduced machine wear and minimized maintenance time will optimize operations. Together with TeSys Model U, it provides a unique motor starter solution.

Read less

Specification	Value
Electrical Connection	4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit \|\| screw connector - rigid without cable end 1 0.5...2.5 mm² AWG 14 control circuit \|\| 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit \|\| screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit \|\| screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit \|\| 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit \|\| screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit \|\| 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit \|\| 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit \|\| screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
Network Frequency	47.5...63 Hz
[Uc] Control Circuit Voltage	24 V DC +/- 10 %
Height	314 mm
Deceleration Time Symb	adjustable from 1 to 10 s
Discrete Input Voltage	24...40 V
Maximum Switching Current	relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive \|\| relay outputs 2 A 250 V AC AC-15 cos phi = 0.5 20 ms inductive
Discrete Output Voltage	24 V 6...30 V) open collector logic
Marking	CE
Power Range	7-11 kW 200-240 V 3 phase \|\| 15-25 kW 380-440 V 3 phase
Net Weight	0.49 kg
Discrete Output Current	2 A DC-13 \|\| 3 A AC-15
Maximum Switching Voltage	440 V relay outputs
Input Output Isolation	galvanic between power and control
Motor Starter Type	soft starter
Function Available	integrated bypass
Supply Voltage Limits	180-528 V
Starting Time	adjustable from 1 to 10 s \|\| 1 s / 50 \|\| 10 s / 5 \|\| 5 s / 10
Minimum Switching Current	10 mA 6 V DC relay outputs
Discrete Input Type	logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
Assembly Style	with heat sink
Output Voltage	<= power supply voltage
Operating Position	vertical +/- 10 degree
Display Type	1 LED Green)starter powered up \|\| 1 LED Yellow)nominal voltage reached
Width	45 mm
Depth	170 mm
Discrete Input Logic	positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
Starting Torque	30...80 % of starting torque of motor connected directly on the line supply
Tightening Torque	1.9-2.5 N.m \|\| 0.5-0.5 N.m
Supply Frequency	50...60 Hz - 5...5 %
Discrete Output Type	open collector logic LO1 end of starting signal \|\| relay outputs R1A, R1C NO
Current Consumption	100 mA
Product Destination	asynchronous motors
Range Of Product	Altistart U01 and TeSys U
Product Or Component Type	soft starter
Motor Power Kw	15 kW, 3 phase 400 V \|\| 7.5 kW, 3 phase 230 V
Phase	3 phase
Power Dissipation In W	2.5 W at full load and at end of starting \|\| 322.5 W in transient state
Utilisation Category	AC-53B EN/IEC 60947-4-2
Icl Starter Rating	32 A
Type Of Start	start with voltage ramp
[Us] Rated Supply Voltage	200...480 V - 10...10 %
Product Specific Application	simple machine
Maximum Horse Power Rating	10 hp, 3 phase 230 V \|\| 20 hp, 3 phase 460 V
Device Short Name	ATSU01

Read less

*New items come with up to 24 month Obso Warranty
Our previously used items and repair options come with 12 months Obso Warranty.

"Super service! Everything was processed very quickly and competently and the personal support was excellent. I would always choose Obso Automation again! Many thanks for the great support." - MJ

*Same & Next Day Delivery & Collection is available for stock from our UK and NL branches. Next-day delivery collection and 2 day delivery is available for stock sourced from our partners. In 90% of cases, we can deliver faster than the manufacturer’s ETA where required.

Standard options for delivery are also available where required.

"Professional, courteous and accurate. Obsolete part quoted same day and supplied next" - PT