STBACI8320K

Home

Manufacturer Manufacturer Right arrow

SCHNEIDER ELECTRIC Term Right arrow

STBACI8320K

Schneider Electric

analog input kit, Modicon STB, standard, 4-20mA, 4 I, 15bits with sign

AVAILABLE

GET A QUOTE NOW

"This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable Automation Controllers (PAC). It has 4 analogue inputs (current 0mA to 20mA, 4mA to 20mA) with 15bit plus sign resolution. This product is compatible with most major fieldbus networks. It is an analogue input kit with a rated supply voltage of 24V DC and a current consumption of 95mA at 5V DC for logic bus. It supports hot swap fallback, requires standard type network interface module (NIM). It is an IP20 rated product. Its dimensions are 128.3mm (width) x 70mm (depth) x 18.4mm (height). It is suitable for packaging, bottling, assembly, distribution, textile, printing and semiconductor machines applications. This product is certified by FM Class 1 Division 2, ATEX category 3G, CE, UL, CSA and C-Tick. This kit is suitable for use with mounting base STBXBA2000 and power distribution module STBPDT3100/3105. The kit includes STBACI8320 module, STBXBA2000 base, STBXTS1100, 6-terminal screw type connector and STBXTS2100, 6-terminal spring clamp connector. The Modicon STB distributed I/O solution is an open, modular input/output system that makes it possible to design automation islands managed by a master controller via a bus or communication network."

Read less

Specification	Value
Insulation Between Channels And Logic Bus	1780 V for 1 minute
Cold Swapping	yes
Maximum Supply Current For Sensors	25 mA per input channels
Input Impedance	250 Ohm
Height	18.4 mm
Insulation Between Channels And Sensor Bus	200 V
Status Led	1 LED (Green) module status (RDY) \|\| 1 LED (Red) module error (ERR)
Hot Swapping Fallback	yes for standard NIMs
Integral Linearity	+/- 0.05 %FS
Supply	power distribution module
Data Format	EN 61131-2 \|\| IEC 61131-2
Current Consumption	95 mA 5 V DC logic bus
Marking	CE
Fallback Status	state 0 basic NIMs \|\| user configurable standard NIMs
Temperature Drift	+/-0.005 %/°C
Addressing Requirement	8 input words
Absolute Accuracy Error	+/- 0.4 % of full scale 25 °C
Absolute Maximum Input	25 mA/50 V DC
Protection Type	short-circuit protection
Update Time	80 ms
Width	128.3 mm
Overvoltage Category	II
Depth	70 mm
Product Compatibility	power distribution module STBPDT3100/3105 \|\| mounting base STBXBA2000
[Us] Rated Supply Voltage	24 V DC
Range Of Product	Modicon STB distributed I/O solution
Type Of Filter	single low pass input filter 985 Hz
Product Or Component Type	standard analog input kit
Analogue Input Number	4
Communication Port Protocol	Hart protocol tolerance
Analogue Input Resolution	15 bits + sign
Kit Composition	STBACI8320 module \|\| STBXBA2000 base \|\| STBXTS1100, 6-terminal screw type connector \|\| STBXTS2100, 6-terminal spring clamp connector
Analogue Input Type	current 0...20 mA \|\| current 4...20 mA

Read less

*New items come with up to 24 month Obso Warranty
Our previously used items and repair options come with 12 months Obso Warranty.

"Super service! Everything was processed very quickly and competently and the personal support was excellent. I would always choose Obso Automation again! Many thanks for the great support." - MJ

*Same & Next Day Delivery & Collection is available for stock from our UK and NL branches. Next-day delivery collection and 2 day delivery is available for stock sourced from our partners. In 90% of cases, we can deliver faster than the manufacturer’s ETA where required.

Standard options for delivery are also available where required.

"Professional, courteous and accurate. Obsolete part quoted same day and supplied next" - PT