ATV650D45N4EU

Home

Manufacturer Manufacturer Right arrow

SCHNEIDER ELECTRIC Term Right arrow

ATV650D45N4EU

Schneider Electric

variable speed drive, Altivar Process ATV600, ATV650, 45kW, 400...480V, IP55

AVAILABLE

GET A QUOTE NOW

Specification	Value
Prospective Line Isc	50 kA
Product Destination	asynchronous motors \|\| synchronous motors
Line Current	69.1 A 480 V normal duty) \|\| 67.1 A 380 V heavy duty) \|\| 59 A 480 V heavy duty) \|\| 79.8 A 380 V normal duty)
Emc Filter	integrated 50 m IEC 61800-3 category C2 \|\| integrated 150 m IEC 61800-3 category C3
Asynchronous Motor Control Profile	variable torque standard \|\| constant torque standard \|\| optimized torque mode
Variant	with disconnect switch
Product Or Component Type	variable speed drive
Apparent Power	49.1 kVA 480 V heavy duty) \|\| 57.4 kVA 480 V normal duty)
Switching Frequency	4...12 kHz with derating factor \|\| 2...12 kHz adjustable
Communication Port Protocol	Ethernet \|\| Modbus serial
Product Specific Application	process and utilities
Safety Function	STO (safe torque off) SIL 3
Maximum Horse Power Rating	50 hp heavy duty \|\| 60 hp normal duty
Supply Frequency	50...60 Hz - 5...5 %
Option Card	slot A communication module, PROFINET \|\| slot A communication module, DeviceNet \|\| slot A communication module, Modbus TCP/EtherNet/IP \|\| slot A communication module, CANopen daisy chain RJ45 \|\| slot A communication module, CANopen SUB-D 9 \|\| slot A communication module, CANopen screw terminals \|\| slot A/slot B digital and analog I/O extension module \|\| slot A/slot B output relay extension module \|\| slot A communication module, Ethernet IP/Modbus TCP/MD-Link \|\| communication module, BACnet MS/TP \|\| communication module, Ethernet Powerlink \|\| slot A communication module, Profibus DP V1
Degree Of Protection	UL type 12 UL 508C
Range Of Product	Altivar Process ATV600
Speed Drive Output Frequency	0.1-500 Hz
Ip Degree Of Protection	IP55IEC 60529 \|\| IP55IEC 61800-5-1
Motor Power Kw	37 kW heavy duty) \|\| 45 kW normal duty)
[Us] Rated Supply Voltage	380...480 V
[Us] Rated Supply Voltage	380...480 V - 15...10 %
Discrete Input Logic	16 preset speeds
Type Of Cooling	forced convection
Continuous Output Current	72 A 4 kHz heavy duty \|\| 87 A 4 kHz normal duty
Nominal Switching Frequency	4 kHz
Device Short Name	ATV650
Synchronous Motor Control Profile	synchronous reluctance motor \|\| permanent magnet motor
Discrete Input Logic	positive logic (source) DI1...DI8), < 5 V, > 11 V \|\| negative logic (sink) DI1...DI8), > 16 V, < 10 V
Analogue Output Type	software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits \|\| software-configurable current AQ1, AQ2 0...20 mA 10 bits \|\| software-configurable current DQ-, DQ+ 30 V DC \|\| software-configurable current DQ-, DQ+ 100 mA
Discrete Output Type	relay outputs R1A, R1B, R1C 250 V AC 3000 mA \|\| relay outputs R1A, R1B, R1C 30 V DC 3000 mA \|\| relay outputs R2A, R2C 250 V AC 5000 mA \|\| relay outputs R2A, R2C 30 V DC 5000 mA \|\| relay outputs R3A, R3C 250 V AC 5000 mA \|\| relay outputs R3A, R3C 30 V DC 5000 mA
Maximum Switching Current	relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC \|\| relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC \|\| relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC \|\| relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC
Exchange Mode	half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Phase	3 phase
Net Weight	50 kg
Type Of Polarization	no impedance
Relay Output Type	configurable relay logic R2 sequence relay NO 100000 cycles \|\| configurable relay logic R3 sequence relay NO 100000 cycles \|\| configurable relay logic R1 fault relay NO/NC 100000 cycles
Frequency Resolution	analog input 0.012/50 Hz \|\| display unit 0.1 Hz
Maximum Transient Current	111.8 A 60 s heavy duty) \|\| 96.8 A 60 s normal duty)
Analogue Input Number	3
Motor Slip Compensation	automatic whatever the load \|\| adjustable \|\| can be suppressed \|\| not available in permanent magnet motor law
Discrete Output Number	0
Method Of Access	slave Modbus TCP
Discrete Input Number	8
Local Signalling	for embedded communication status 3 LEDs (dual colour) \|\| for communication module status 4 LEDs (dual colour) \|\| for presence of voltage 1 LED (red) \|\| for local diagnostic 3 LEDs
Linearity Error	AO1, AO2 +/- 0.2 % analog output \|\| AI1, AI2, AI3 +/- 0.15 % of maximum value analog input
Number Of Addresses	1-247 Modbus serial
Width	290 mm
Transmission Rate	10, 100 Mbits \|\| 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Depth	401 mm
Analogue Input Type	AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits \|\| AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits \|\| AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits
Sampling Duration	5 ms +/- 1 ms DI5, DI6) - discrete input \|\| 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input \|\| 10 ms +/- 1 ms AO1) - analog output \|\| 2 ms +/- 0.5 ms DI1...DI4) - discrete input
Electrical Connection	line side screw terminal 35...50 mm² \|\| motor screw terminal 35...50 mm² \|\| control removable screw terminals 0.5...1.5 mm²
Maximum Output Frequency	500 kHz
Height	910 mm
Acceleration And Deceleration Ramps	linear adjustable separately from 0.01...9999 s
Transmission Frame	RTU
Relay Output Number	3
Data Format	8 bits, configurable odd, even or no parity
Accuracy	+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output \|\| +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
Connector Type	RJ45 on the remote graphic terminal)Modbus serial \|\| RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
Input Compatibility	DI5, DI6 discrete input level 1 PLC IEC 65A-68 \|\| STOA, STOB discrete input level 1 PLC IEC 61131-2 \|\| DI1...DI6 discrete input level 1 PLC IEC 61131-2
Permissible Temporary Current Boost	1.5 x In 60 s heavy duty) \|\| 1.1 x In 60 s normal duty)
Mounting Mode	wall mount
Analogue Output Number	2
Physical Interface	Ethernet \|\| 2-wire RS 485
Minimum Switching Current	relay output R1, R2, R3 5 mA 24 V DC
Refresh Time	relay output R1, R2, R3)5 ms +/- 0.5 ms)
Enclosure Mounting	wall mounted
Isolation	between power and control terminals
Output Voltage	<= power supply voltage
Quantity Per Set	1
Braking To Standstill	by DC injection
Discrete Input Type	DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V)
Protection Type	safe torque off motor \|\| motor phase break motor \|\| thermal protection drive \|\| safe torque off drive \|\| overheating drive \|\| overcurrent between output phases and earth drive \|\| overload of output voltage drive \|\| short-circuit protection drive \|\| motor phase break drive \|\| overvoltages on the DC bus drive \|\| line supply overvoltage drive \|\| line supply undervoltage drive \|\| line supply phase loss drive \|\| overspeed drive \|\| break on the control circuit drive \|\| thermal protection motor
Supply	internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection \|\| internal supply for digital inputs and STO 24 V DC 21-27 V), <200 mA overload and short-circuit protection \|\| external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection

Read less

*New items come with up to 24 month Obso Warranty
Our previously used items and repair options come with 12 months Obso Warranty.

"Super service! Everything was processed very quickly and competently and the personal support was excellent. I would always choose Obso Automation again! Many thanks for the great support." - MJ

*Same & Next Day Delivery & Collection is available for stock from our UK and NL branches. Next-day delivery collection and 2 day delivery is available for stock sourced from our partners. In 90% of cases, we can deliver faster than the manufacturer’s ETA where required.

Standard options for delivery are also available where required.

"Professional, courteous and accurate. Obsolete part quoted same day and supplied next" - PT