Google Reviews
TrustPilot Reviews
ATV930D90N4ZU
Schneider Electric
variable speed drive, Altivar Process ATV900, ATV930, 90kW, 380 to 480V, cabinet Integration, IP20, for US
AVAILABLE
GET A QUOTE NOW
-
| Specification | Value |
|---|---|
| Discrete Input Logic | positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V || positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V || positive logic (source) STOA, STOB), < 5 V, > 11 V |
| Power Dissipation In W | natural convection 196 W 380 V 2.5 kHz || forced convection 1585 W 380 V 2.5 kHz |
| Analogue Output Type | software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits |
| Discrete Output Type | logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA |
| Maximum Switching Current | relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R3 resistive, cos phi = 1 5 A 250 V AC || relay output R2, R3 resistive, cos phi = 1 5 A 30 V DC || relay output R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC |
| 4 Quadrant Operation Possible | true |
| Exchange Mode | half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP |
| Local Signalling | local diagnostic 3 LED mono/dual colour) || embedded communication status 5 LED dual colour) || communication module status 2 LED dual colour) || presence of voltage 1 LED red) |
| Data Format | 8 bits, configurable odd, even or no parity Modbus serial |
| Relative Symmetric Network Frequency Tolerance | 5 % |
| With Safety Function Safe Direction (Sdi) | false |
| Type Of Polarization | no impedance |
| Relay Output Type | configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 1000000 cycles || configurable relay logic R3 sequence relay NO 1000000 cycles |
| Analogue Input Number | 3 |
| Motor Slip Compensation | adjustable || not available in permanent magnet motor law || can be suppressed || automatic whatever the load |
| Discrete Output Number | 2 |
| With Safety Function Safe Position (Sp) | false |
| Transmission Rate | 10/100 Mbit/s Ethernet IP/Modbus TCP || 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial |
| Method Of Access | slave Modbus TCP |
| With Safety Function Safely Limited Position (Slp) | false |
| With Safety Function Safe Operating Stop (Sos) | false |
| Number Of Addresses | 1-247 |
| Discrete Input Number | 10 |
| Linearity Error | AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AQ1, AQ2 +/- 0.2 % analog output |
| Number Of Addresses | 1-247 Modbus serial |
| With Sft Fct Safe Stop 2 (Ss2) | false |
| With Safety Function Safe Stop 1 (Ss1) | true |
| Width | 265 mm |
| Transmission Rate | 10, 100 Mbits || 4.8 kbps || 9600 bit/s || 19200 bit/s |
| Depth | 307 mm |
| Analogue Input Type | AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits |
| Sampling Duration | 2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output |
| Electrical Connection | control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || line side screw terminal 120 mm² AWG 4/0...250 kcmil || motor screw terminal 120 mm² 250 kcmil || DC bus screw terminal 95...120 mm² AWG 3/0...250 kcmil |
| With Safety Function Safe Brake Management (Sbc/Sbt) | true |
| Height | 748 mm |
| Acceleration And Deceleration Ramps | linear adjustable separately from 0.01...9999 s |
| Maximum Output Voltage | 480.0 V |
| Base Load Current At High Overload | 145.0 A |
| Transmission Frame | RTU |
| With Safety Function Safe Speed Monitor (Ssm) | false |
| Relay Output Number | 3 |
| With Safety Function Safe Torque Off (Sto) | true |
| Data Format | 8 bits, configurable odd, even or no parity |
| Base Load Current At Low Overload | 173.0 A |
| Accuracy | +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output |
| Input Compatibility | DI1...DI8 discrete input level 1 PLC EN/IEC 61131-2 || DI7, DI8 pulse input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC EN/IEC 61131-2 |
| Connector Type | 2 RJ45 || 1 RJ45 |
| Analogue Output Number | 2 |
| Physical Interface | Ethernet || 2-wire RS 485 |
| Minimum Switching Current | relay output R1, R2, R3 5 mA 24 V DC |
| Refresh Time | relay output R1, R2, R3)5 ms +/- 0.5 ms) |
| Isolation | between power and control terminals |
| With Safety Function Safe Programmable Logic | false |
| Brake Chopper Integrated | true |
| Quantity Per Set | 1 |
| Type Of Polarization | no impedance Modbus serial |
| Braking To Standstill | by DC injection |
| Discrete Input Type | DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm || DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V) || STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm |
| Protection Type | thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-circuit protection drive || motor phase break drive || overvoltages on the DC bus drive || line supply overvoltage drive || line supply undervoltage drive || line supply phase loss drive || overspeed drive || break on the control circuit drive |
| Supply | external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for digital inputs and STO 24 V DC 21-27 V), <200 mA overload and short-circuit protection |
| With Safety Function Safely Limited Speed (Sls) | true |
| Prospective Line Isc | 50 kA |
| Network Frequency | 50-60 Hz |
| Product Destination | synchronous motors || asynchronous motors |
| Line Current | 156.2 A 380 V normal duty) || 134.3 A 380 V heavy duty) || 135.8 A 480 V normal duty) || 118.1 A 480 V heavy duty) |
| Phase | 3 phase |
| Asynchronous Motor Control Profile | constant torque standard || optimized torque mode || variable torque standard |
| Variant | standard version || with braking chopper |
| Product Or Component Type | variable speed drive |
| Apparent Power | 112.9 kVA 480 V normal duty) || 98.2 kVA 480 V heavy duty) |
| Ip Degree Of Protection | IP21 |
| Switching Frequency | 1...8 kHz adjustable || 2.5...8 kHz with derating factor |
| Maximum Transient Current | 207.6 A 60 s normal duty) || 217.5 A 60 s heavy duty) |
| Communication Port Protocol | EtherNet/IP || Modbus serial || Modbus TCP |
| Product Specific Application | process for industrial |
| Option Card | slot A communication module Profibus DP V1 || slot A communication module PROFINET || slot A communication module DeviceNet || slot A communication module EtherCAT || slot A communication module CANopen daisy chain RJ45 || slot A communication module CANopen SUB-D 9 || slot A communication module CANopen screw terminals || slot A/slot B/slot C digital and analog I/O extension module || slot A/slot B/slot C output relay extension module || slot B 5/12 V digital encoder interface module || slot B analog encoder interface module || slot B resolver encoder interface module || communication module Ethernet Powerlink |
| Degree Of Protection | UL type 12 |
| Maximum Output Frequency | 599 Hz |
| Range Of Product | Altivar Process ATV900 |
| Motor Power Kw | 90.0 kW normal duty || 75.0 kW heavy duty |
| [Us] Rated Supply Voltage | 380...480 V - 15...10 % |
| Mounting Mode | cabinet mount |
| Discrete Input Logic | 16 preset speeds |
| Continuous Output Current | 173 A 2.5 kHz normal duty || 145 A 2.5 kHz heavy duty |
| Nominal Switching Frequency | 2.5 kHz |
| Emc Filter | integrated || with EMC plate option |
| Device Application | Industrial Application |
| Synchronous Motor Control Profile | permanent magnet motor || synchronous reluctance motor |
Read more
Read less
Read less
*New items come with up to 24 month Obso Warranty
Our previously used items and repair options come with 12 months Obso Warranty.
"Super service! Everything was processed very quickly and competently and the personal support was excellent. I would always choose Obso Automation again! Many thanks for the great support." - MJ
Our previously used items and repair options come with 12 months Obso Warranty.
"Super service! Everything was processed very quickly and competently and the personal support was excellent. I would always choose Obso Automation again! Many thanks for the great support." - MJ
*Same & Next Day Delivery & Collection is available for stock from our UK and NL branches. Next-day delivery collection and 2 day delivery is available for stock sourced from our partners. In 90% of cases, we can deliver faster than the manufacturer’s ETA where required.
Standard options for delivery are also available where required.
"Professional, courteous and accurate. Obsolete part quoted same day and supplied next" - PT
Standard options for delivery are also available where required.
"Professional, courteous and accurate. Obsolete part quoted same day and supplied next" - PT
We are ISO 9001 accredited so you have peace of mind with your purchase.
1
Step 1
Part added for enquiry
2
Step 2
Your personal Account Manager is already on it, delivering rapid responses and unbeatable service.
3
Step 3
We don’t just process orders—we guarantee smooth delivery, full transparency, and zero headaches.
4
Step 4
Our 10,000+ customers trust us for a reason. Get your quote now and experience automation without risk, delays, or uncertainty.
